B&C Electronics Overflow Cell SZ 7263
Overflow cell for 1 sensor and Pt100. Low cost
This series of cells is made for the measurement of residual chlorine with a potentiostatic method, but can be used for other sensors and measures too.
The cell’s manufacturing characteristics allow the sample to run through the potentiostatic electrode site with a constant velocity.
The in-flow can be regulated through a check valve.
FeaturesTechnical Data
Material: clear acrylic resin
Inlet: 1/8″ fitting
Outlet: fitting for 10×14 mm tubing
Connection tubing: 2 m 4×6 tubing
Flow: about 10/30 litre/hour approx
Temperature: 0/50 °C
Recommended sensors
pH = SZ 165
ORP = SZ 275
Cl2 = SZ 283
°C = SP 514
| Material | clear acrylic resin |
| Inlet | 1/4″ fitting |
| Outlet | fitting for 10×14 mm tubing |
| Connection tubing | 2 m 4×6 tubing |
| Flow | about 10/30 liter/hour approx |
| Temperature | 0/50°C |
| SZ 7261 dimensions | diameter 55 x 150 mm |
| Sensors site | diameter 12 mm for pH/ORP/Cl diameter 5 mm for temperature |
| Suggested sensors | pH = SZ 165 ORP = SZ 275 Cl2 = SZ 283 °C = SP 514 |
