B&C Electronics OD 8182
Suitable for dissolved oxygen measurements in water treatment, activated sludge, de-nitrification, fish ponds.
The probe is equipped with a galvanic membraned sensor and a RTD temperature element.
Ready to operate with compressed air autoclean system on the membrane.
The design of the sensing element and the high quality of
manufacturing materials, allow for great Zero stability and great
performances, even in effluents with high Sulfite concentrations.
Furthermore, the probe requires very little maintenance and long
calibration intervals.
Main Specifications
Response time: 90% in 180 s with 5 mils membrane
Temp. sensor: Pt100 integral to sensor
Temp. limits: -5 to +55 °C
Connections: 5 wires cable, 15 m (150 m max)
15 m flexible tubing 1/4″-3/8″
Materials: Noryl and AISI316
| Sensing element | regenerable |
| Drift | < 1% year |
| Type | submersible with removable sensor |
| Response time | 95%< 60s |
| Temperature compensation | internal table |
| Temperature sensor | RTD Pt 100 built-in |
| Compensation range | 0.0/50.0 °C |
| Power supply | from OD 7685.010 |
| Operating temperature | -5/+55 °C |
| Pressure | 1 Bar max |
| Autocleaning | by means of pressured air nozzle |
| Air pressure | 3 Bar max |
| Materials | Noryl, AISI 316 e Titanium |
| Diameter | 60 mm |
| Length | 165 mm |
| Thread | 2” NPT |
| Cable | 5×0,4 L=15m |
| Pressured air tubing | PVC 1/4” – 3/8” |
| Protection | IP68 |
- Food and beverage
- Paper and pulp
- Chemical industry
- Textile industry
- Water treatment
