CL 7685.001 Cl2, O3 analyzer with PID regulation
Specifications
- Scales in ppm
- Measuring units: Cl2, ClO2, D.O3
- Temperature readout by means of Pt100
- Range: 0/2,000 ppm – 0/20,00 ppm – 0/200,0 ppm
- Temperature range: -2/+52 °C
- Operating mode: automatic and manual.
- Analog output: 0-20 or 4-20 mA isolated
- PID output:
-0-20 mA or 4-20 mA isolated output
-dual relay for stepping motor - Alarm on set-point deviation
- Power supply 110/220 V, 5 VA
- Dimensions: 96x96x155 mm. DIN 43700
Technical Specifications
in addition to those common in the series 7685
* Measuring: D.Ozone/Residual Chlorine
* Measuring cell: Potentiostatic/Polarographic
Polarographic cell
Current: 160 nA/PPM at 20 °C
* Scales: 0/2.000 PPM – 0/20.00 PPM -0/200.0 PPM
Zero adjustment: ± 200 nA
Cell sensitivity: 12.5/250 %
Potentiostatic cell
* Scales: 0/2.000 PPM – 0/20.00 PPM
Zero adjustment: ± 2 µA
Cell sensitivity: 12.5/250 %
* Polarization: -200 mV (0/-1250 mV)
* Filter software 90%RT: 0.1/20.0 s for small/large variations
Temperature
Input: Pt100 3 wires
Measuring and compensation range: -2/52 °C
Manual temperature: -2/52 °C
Resolution: 0.1 °C
Zero adjustment: ± 1 °C
* Temperature coefficient: 0/4.0 %/°C
Regulation:
* 4/20 mA or 0/20 mA/Stepping motor
* Motor time: 10/120.0 s
* Dead time: 0/20.0 s
Manual starting position: 0/100.0 %
Set-point: any value in the measuring range
* Dead band: 0.2/20.0 % (stepping motor)
Proportional band: 0.1/400.0 %
* Derivative: 0/1200 s
* Integral: 0/3600 s
Option
091.4143 9/36VDC power supply