Digital IDS pH Electrodes – Liquid Electrolyte

Digital measurement of pH with built-in electrode quality monitoring – usable in all areas of lab and field measurement

Digital IDS pH Electrodes

pH electrodes are the most frequently used electro-chemical sensors. They are used practically in all areas of lab and field measurement. At the same time, the deliver the most sensitive measuring signals and must be serviced and calibrated at regular intervals.

This is exactly where the concept of IDS sensors comes in. Digital data transfer is safe against interference, allows the use of long cables and permits important additional information such as calibration data and sensor recognition.

WTW offers a wide variety of IDS pH electrodes for field use, all the way to special applications in the lab. The QSC function allows monitoring of the current sensor status with all IDS pH electrodes.

FeaturesTechnical DataDownload
  • Safely measured values due to signal processing in the sensor
  • Easy electrode replacement thanks to calibration data stored inside sensor
  • Sensor quality monitoring by QSC function
SenTix® 940/940-3 950 980
pH 0.000 … 14.000
± 0.004
0.000 … 14.000
± 0.004
0.000 … 14.000
± 0.004
mV – – – – – – – – –
Temp. 0 … 80 °C 0 … 80 °C 0 … 100 °C
SenTix® 945 Micro 900 Sp-T 900 HW-T-900
Measuring range pH: 0.000 … 14.000 ± 0.002 pH: 0.000 … 14.000 ± 0.002 pH: 0.000 … 13.000 ± 0.002 pH: 0.000 … 14.000 ± 0.002
Area of use 0 … 80 °C 0 … 100 °C 0 … 50 °C 0 … 60 °C
Reference electrolyte Gel KCl 3 mol/l Polymer KCl 3 mol/l
Membrane form Sphere Cylinder Spear Cylinder
Diaphragm 3 x ceramic Platinum wire Hole Grinding
Shaft material Glass Glass Plastic Glass
Shaft length 120 mm 70/130 mm 65/25 mm 120 mm
Shaft diameter 12 mm 12/5 mm 15/5 mm 12 mm
Temperature sensor NTC 30 kOhm NTC 30 kOhm NTC 30 kOhm NTC 30 kOhm
Connecting cable 1.5 m with digital plug 0.5 m with digital plug 0.5 m with digital plug 0.5 m with digital plug